- Analog & Digital Signal Conversion
- FAA TSO’d to DO-160G & DO-178 Level C
- Converts Raw Engine Data to Formatted Serial Data
EDC-33 Smart Engine Data Converter
Analog & Digital Signal Conversion
- Converts raw engine data to formatted serial data.
Precise, Stable & Accurate
- FAA TSO’d to DO-160G & DO-178 Level C
Accurate, Dependable & Easy To Use
- Electronics International consistently has been a leader in digital engine instrumentation since 1979.
EDC-33 Overview
The EDC-33 (Engine Data Converter) is sometimes referred to as a Data Acquisition Unit (DAU) and has a broad range of applications. Its main purpose is to monitor the probes, transducers and sensors mounted on the engine and airframe. It then processes this data and outputs it on a serial bus. This allows a Display Unit or MFD to display the data without having to perform the intense processing required in a set timeframe.Also, annunciators and status switches can be monitored.
The EDC-33 Engine Data Converter can be used on piston, turboprop or jet aircraft as well as helicopters. If an EEC or FADC system needs to be monitored, check out our BC-5 (Bus Converter).
Functions Available
| Ng | Strain | Tail Rotor | Gear Box Temp |
| Np | Oxygen | Super Heat | Landing Gear |
| ITT | Cabin Alt | EGT | Annunciators |
| Torque | Cabin Diff Pressure | CGT | Throttle |
| G-Sensor | Main Rotor | Angle of Attack | Amps |
| Vibration | Frequency | Flap Position | IAT |
| Oil Temp | Boom Pressure | RPM | Hydraulic Pressure |
| Elevator Trim | Aileron Trim | Rudder Trim | TIT |
| Yoke Position | Carb Temp | Fuel Level | Oil Pressure |
| Manifold Pressure | Vacuum | Fuel Flow | CHT |
| DC Volts | OAT | Fuel Pressure | Various Switch Positions |
| AC Volts | Many Others, Contact EI |
Smart Conversions
Processed and Calibrated Data Out
- Analog and pulse signals are received and processed using an array of algorithms that massage the data into readable engineering units.
- The EDC can provide simple linear conversions or mapped linearization for non-linear inputs or complex calculations.
- Processed data is output via a number of serial protocols.
- A receiving display unit only has to display the processed data as it is received.
Optimal Solution for Custom Monitoring Applications
- Bluetooth capable for wireless in-field calibration.
- The formatted data provides an easy integration to any display head without further processing.
Contact Us
Bring Us Your Project
- For more information on how the EDC-33 Engine Data Converter can help you, contact us by phone at (541) 318-6060 or by email at Support@iFlyEi.com.
Specifications
Dimensions
5.85” L x 3.71” W x 2.35” H
Weight
1.0 Lb
Power Requirements
7.5 to 50 Volts
Typical: 0.1 amps @ 12 Volts
Certifications
FAA TSO’d to DO-160G & DO-178 Level C
Typical Input Configurations
- Model EDC-33P: 1-Volt Channel, 1-Amp Channel, 1-Fuel Flow Channel, 6-Pressure Channels, 17-Temp Channels, 4-Resistive Fuel Level Channels, 4-Capacitive Fuel Level Channels and 2-RPM Channels.
- Model EDC-33T-XX: 1-Volt Channel, 1-Amp Channel, 1-Fuel Flow Channel, 9-Pressure Channels, 13-Temp Channels, 4-Resistive Fuel Level Channels or 4-Capacitive Fuel Level Channels and 2-RPM Channels.
Note: For both models, Temp, Fuel Level and Pressure channels can be used instead to monitor other functions or annunciators.
