I have seen your products in other aircraft and have seen their reliability.
- Customer
Juan P. from British Columbia, Canada
- Aircraft
Cessna 172M Skyhawk
- EI Instrument
We now offer a comprehensive kit that includes crimpers and ferrules (20 ga and 24 ga) along with our popular OLC-2 connectors, designed by our engineers with naval brass barrels, a nylon sleeve, and two set screws. This new connection method rivals the strength of gas-tight cold welds, ensuring the most reliable and long-lasting wire connections Electronics International has ever offered for your aircraft engine monitors.
8am–4:30pm PST M–F
Open Now

Prepare the Wires: Strip the ends of the wires to the appropriate length.

Crimp the Ferrules: Place the stripped wire ends into the ferrules and use the crimper to secure them.

Insert into OLC-2: Insert the crimped ferrule ends into the OLC-2 connector and tighten the set screws.

Crimp the ferrule.

Snip off any excess wire that may be protruding through the end of the ferrule terminal.

Pull on the crimped ferrule (3 to 4lbs) to ensure that it is firmly attached to the wire.

Insert the crimped ferrule into OLC-2 and tighten with a hex wrench until the hex wrench flexes (3 inches lbs). Repeat on the opposite end to complete your connection.

Pull on wires (3 to 4lbs) to ensure that your connections on both sides of the OLC-2 are firm and secure.
Wire Connector Package
WC-Pkg
$85
Lead Time: Usually ships within 2–3 business days.

I have seen your products in other aircraft and have seen their reliability.
Great to have all 6 egt’s, installation was straightforward. [I chose E.I. because of] price and availability.
Your product didn’t feel cheaply made. Overall much better quality with the bezel and buttons and knobs. Also much easier to navigate and add fuel.
Just about to begin flying with the EI MVP-50P, so no in-flight feedback yet. But I did study the user manual, then sat in my plane going through the screens, menus, etc. It was very easy and intuitive to locate everything, so I’m confident that it will become second nature to do this in flight… Very happy with all interactions with EI.
Sales reps have been very friendly and helpful.
My mechanic said that your product was very good, and he was correct.
I have several EI units in my aircraft and have been very pleased with their reliability over the years. The other great part, besides the unit themselves, is the support from you all. Thank you for your support over the years… I chose IE for your reputation for quality and pricing. I have been very pleased with my units. My graphic engine analyzer, fuel flow meter, volt/amp meter, RPM and now Manifold gauge.
Great product at a great price …. (and) reliability.
After a full IFR install on my Cessna 175, my two favorite instruments without question is the CGR-30 Combo set. Simple and customizable, the data is invaluable!
I was able to try out the CGR-30P in a flight school plane. I was very impressed with the ease of use, visual quality, and information provided on the main screen… I feel it will pay for itself in fuel savings, and extended engine time before overhaul.
Great… price [&] support
The reviews online were very good. Customer service has been great.