Skip to content
-
-
-
- Crimper & Hex Wrench
- Ferrules & Connectors
- Wire Connector Guide
$85.00
- Crimper & Hex Wrench
- Ferrules & Connectors
- Wire Connector Guide
-
- FAA approved
- Mounts in a 2-1/4″ hole
- Operates from 7.5 to 35 volts
- .1 amp idle, 3 amps max
$220.00
- FAA approved
- Mounts in a 2-1/4" hole
- Operates from 7.5 to 35 volts
- .1 amp idle, 3 amps max
-
-
- Green LEDs
- Connects to R-1, M-1, OPT-1, FL-2, FP-5L & More
- Connects to any one or all of these EI Instruments
$60.00
- Green LEDs
- Connects to R-1, M-1, OPT-1, FL-2, FP-5L & More
- Connects to any one or all of these EI Instruments
-
- External Pot
- Controls Display Intensity
- Used with MVP-50P & MVP-50T
$72.00
- External Pot
- Controls Display Intensity
- Used with MVP-50P & MVP-50T
-
- Threaded or Boss Mount
- Up to 20ft in length
- Electronics isolated from fuel
$500.00
- Threaded or Boss Mount
- Up to 20ft in length
- Electronics isolated from fuel
-
- Primary Replacement
- 3 1/8″ Flush Mounts (2)
- Can Replace Up To 16 Primary Instruments.
- Primary Replacement
- 3 1/8" Flush Mounts (2)
- Can Replace Up To 16 Primary Instruments.
-
- Primary Replacement STC’d, TSO’d & PMA’d
- 3 1/8″ Flush Mount
- Replace Your Tachometer (RPM, EGT/CHT) And 5 Additional Primary Functions Of Your Choice.
- Primary Replacement STC'd, TSO'd & PMA'd
- 3 1/8" Flush Mount
- Replace Your Tachometer (RPM, EGT/CHT) And 5 Additional Primary Functions Of Your Choice.
-
- Primary Replacement STC’d, TSO’d & PMA’d
- 3 1/8″ Flush Mount
- Replace Your Tachometer (RPM, EGT/CHT) And 5 Additional Primary Functions Of Your Choice.
- Pick Four Primary Functions For Each Head
- Pick Up To Five Additional Functions At No Cost
- Primary Replacement STC'd, TSO'd & PMA'd
- 3 1/8" Flush Mount
- Replace Your Tachometer (RPM, EGT/CHT) And 5 Additional Primary Functions Of Your Choice.
- Pick Four Primary Functions For Each Head
- Pick Up To Five Additional Functions At No Cost
-
- Primary Replacement STC’d & TSO’d
- 5.55″ x 5.15″ Flush Mount
- Engine Analyzer, Primary Engine Gauge Replacement, Fuel Levels And Fuel Flow Totalizer.
- Primary Replacement STC'd & TSO'd
- 5.55" x 5.15" Flush Mount
- Engine Analyzer, Primary Engine Gauge Replacement, Fuel Levels And Fuel Flow Totalizer.
-
- Primary Replacement STC’d, TSO’d & PMA’d
- 3 1/8″ Flush Mount
- Replace Your Tachometer (RPM), EGT/CHT Bar Graph, Fuel Flow + More.
- Primary Replacement STC'd, TSO'd & PMA'd
- 3 1/8" Flush Mount
- Replace Your Tachometer (RPM), EGT/CHT Bar Graph, Fuel Flow + More.
-
- Military Bayonet Type
- 1/4 Turn Locking for Quick Removal
- FAA TSO’d, PMA’d
$128.00
- Military Bayonet Type
- 1/4 Turn Locking for Quick Removal
- FAA TSO’d, PMA’d
-
- 12mm Gasket Type CHT Probe
- 700°F Max Operating Temp
- FAA TSO’d, PMA’d
$128.00
- 12mm Gasket Type CHT Probe
- 700°F Max Operating Temp
- FAA TSO'd, PMA'd
-
- 14mm Gasket Type CHT Probe
- 700°F Max Operating Temp
- FAA TSO’d, PMA’d
$128.00
- 14mm Gasket Type CHT Probe
- 700°F Max Operating Temp
- FAA TSO'd, PMA'd
-
- 18mm Gasket Type CHT Probe
- 700°F Max Operating Temp
- FAA TSO’d, PMA’d
$128.00
- 18mm Gasket Type CHT Probe
- 700°F Max Operating Temp
- FAA TSO'd, PMA'd
-
- 3/8″ Piggy Back Type CHT Probe
- 700°F Max Operating Temp
- FAA TSO’d, PMA’d
$128.00
- 3/8" Piggy Back Type CHT Probe
- 700°F Max Operating Temp
- FAA TSO'd, PMA'd
-
- Screw-down Type, #6 Hole
- Surface Temp Probe
- FAA TSO’d, PMA’d
$128.00
- Screw-down Type, #6 Hole
- Surface Temp Probe
- FAA TSO’d, PMA’d
-
- Fast Response Exposed Tip
- Uses a Prescision Connector
- FAA TSO’d, PMA’d
$128.00
- Fast Response Exposed Tip
- Uses a Prescision Connector
- FAA TSO’d, PMA’d
-
- Sealed Tip
- Usable in Harsh Environments
- Usable in Pressure Environments
- FAA TSO’d, PMA’d
$128.00
- Sealed Tip
- Usable in Harsh Environments
- Usable in Pressure Environments
- FAA TSO’d, PMA’d
-
- Primary Replacement STC’d & TSO’d
- 5.55″ x 5.15″ Flush Mount
- Reliability. Accuracy. Data Logging For Trend Analysis, External Annunciators To Eliminate Need To Scan Panel.
- Primary Replacement STC’d & TSO’d
- 5.55" x 5.15" Flush Mount
- Reliability. Accuracy. Data Logging For Trend Analysis, External Annunciators To Eliminate Need To Scan Panel.
-
- FAA Approved
- Stainless Steel
- Pressure Range: 0 – 300 PSI
$248.00
- FAA Approved
- Stainless Steel
- Pressure Range: 0 - 300 PSI
-
- Primary Replacement
- 5.55″ x 5.15″ Flush Mount
- Reliability. Accuracy. Data Logging For Trend Analysis, External Annunciators To Eliminate Need To Scan Panel.
- Primary Replacement
- 5.55" x 5.15" Flush Mount
- Reliability. Accuracy. Data Logging For Trend Analysis, External Annunciators To Eliminate Need To Scan Panel.
-
- Master & Tattletale Warning Lights
- Data Recorder (BC-5R)
- 4 Premium TR-1 Instruments
$8,000
- Master & Tattletale Warning Lights
- Data Recorder (BC-5R)
- 4 Premium TR-1 Instruments
$8,000
-
- Primary Replacement
- 2″ Mount
- Reliable, Rugged & Accurate.
$1,700.00 – $2,000.00
- Primary Replacement
- 2" Mount
- Reliable, Rugged & Accurate.
-
- Primary Replacement
- 2″ Mount
- Reliable, Rugged & Accurate.
$1,700.00 – $2,000.00
- Primary Replacement
- 2" Mount
- Reliable, Rugged & Accurate.
-
- Primary Replacement
- 2″ Mount
- Reliable, Rugged & Accurate.
$1,700.00 – $2,000.00
- Primary Replacement
- 2" Mount
- Reliable, Rugged & Accurate.
-
- Primary Replacement
- 2″ Mount
- Reliable, Rugged & Accurate.
$1,700.00 – $2,000.00
- Primary Replacement
- 2" Mount
- Reliable, Rugged & Accurate.
-
- Primary Replacement
- 2″ Mount
- Reliable, Rugged & Accurate.
$1,700.00 – $2,000.00
- Primary Replacement
- 2" Mount
- Reliable, Rugged & Accurate.
-
- Primary Replacement STC’d, TSO’d & PMA’d
- 3 1/8″ Flush Mount
- Replace Up To 16 Gauges In Your Panel.
- Primary Replacement STC'd, TSO'd & PMA'd
- 3 1/8" Flush Mount
- Replace Up To 16 Gauges In Your Panel.
-
- Primary Replacement
- 2 1/4″ Flush Mount
- Precision Volts And Amps With Built-In Alarms.
$500.00 – $560.00
- Primary Replacement
- 2 1/4" Flush Mount
- Precision Volts And Amps With Built-In Alarms.
-
- Consider Instead our CGR-30P.
- Click Here To Learn More.
- Consider Instead our CGR-30P.
- Click Here To Learn More.
-
- Primary Replacement
- 2 1/4″ Flush Mount
- Displays Manifold Pressure In A Stable, Digital Format.
$700.00
- Primary Replacement
- 2 1/4" Flush Mount
- Displays Manifold Pressure In A Stable, Digital Format.
-
- Primary Option Available
- 2 1/4″ Flush Mount
- Most Versatile Fuel Computer In The Industry.
$496.00 – $1,296.00
- Primary Option Available
- 2 1/4" Flush Mount
- Most Versatile Fuel Computer In The Industry.
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- For Experimental A/C Only. Not STC’d/PMA’d/TSO’d. Digital Fuel Level.
$600.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- For Experimental A/C Only. Not STC'd/PMA'd/TSO'd. Digital Fuel Level.
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- For Experimental A/C Only. Not STC’d/PMA’d/TSO’d. Digital Fuel Levels For Dual Fuel Tanks. Fuel Gauge.
$600.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- For Experimental A/C Only. Not STC'd/PMA'd/TSO'd. Digital Fuel Levels For Dual Fuel Tanks. Fuel Gauge.
-
- Primary Replacement
- 2 1/4″ Flush Mount (3 1/8″ Adaptor Plate Available)
- Displays Accurate RPM Measurement In Digital And Analog Format.
$700.00
- Primary Replacement
- 2 1/4" Flush Mount (3 1/8" Adaptor Plate Available)
- Displays Accurate RPM Measurement In Digital And Analog Format.
-
- Primary Replacement
- 2 1/4″ Flush Mount
- Displays Accurate Oil Pressure And Temperature Readings.
$760.00
- Primary Replacement
- 2 1/4" Flush Mount
- Displays Accurate Oil Pressure And Temperature Readings.
-
- Replacement Clock
- 2 1/4″ Flush Mount
- Full Functional, Panel-Mounted Aircraft Clock.
$440.00
- Replacement Clock
- 2 1/4" Flush Mount
- Full Functional, Panel-Mounted Aircraft Clock.
-
- Primary Replacement
- 2 1/4″ Flush Mount
- Displays Carb and Outside Temperature Readings
$532.00
- Primary Replacement
- 2 1/4" Flush Mount
- Displays Carb and Outside Temperature Readings
-
- Primary Replacement
- 2 1/4″ Flush Mount
- Displays Carb or Outside Temperature Readings
$428.00
- Primary Replacement
- 2 1/4" Flush Mount
- Displays Carb or Outside Temperature Readings
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- EGT Readings In A Stable, One-Degree Digital Format.
$428.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- EGT Readings In A Stable, One-Degree Digital Format.
-
- Primary Replacement
- 2 1/4″ Flush Mount
- EGT Readings In A Stable, One-Degree Digital Format.
$492.00
- Primary Replacement
- 2 1/4" Flush Mount
- EGT Readings In A Stable, One-Degree Digital Format.
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- EGT Readings In A Stable, One-Degree Digital Format.
$820.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- EGT Readings In A Stable, One-Degree Digital Format.
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- EGT Readings In A Stable, One-Degree Digital Format.
$880.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- EGT Readings In A Stable, One-Degree Digital Format.
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- EGT Readings In A Stable, One-Degree Digital Format.
$1,000.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- EGT Readings In A Stable, One-Degree Digital Format.
-
- Primary Replacement (OAT)
- 2 1/4″ Flush Mount
- One Channel Of EGT, One Channel Of CHT, One Channel Of OAT In A Stable, One-Degree Digital Format.
$648.00
- Primary Replacement (OAT)
- 2 1/4" Flush Mount
- One Channel Of EGT, One Channel Of CHT, One Channel Of OAT In A Stable, One-Degree Digital Format.
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- Monitor EGT And CHT With Precision Without Breaking The Bank.
$580.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- Monitor EGT And CHT With Precision Without Breaking The Bank.
-
- Consider instead our CGR-30P or CGR-30C.
- Click here to learn more.
- Consider instead our CGR-30P or CGR-30C.
- Click here to learn more.
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- Monitor EGT And CHT With Precision Without Breaking The Bank.
$1,000.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- Monitor EGT And CHT With Precision Without Breaking The Bank.
-
- Consider instead our CGR-30P or CGR-30C.
- Click here to learn more.
- Consider instead our CGR-30P or CGR-30C.
- Click here to learn more.
-
- Consider instead our CGR-30P or CGR-30C.
- Click here to learn more.
- Consider instead our CGR-30P or CGR-30C.
- Click here to learn more.
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- CHT Readings In A Stable, One-Degree Digital Format.
$428.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- CHT Readings In A Stable, One-Degree Digital Format.
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- CHT Readings In A Stable, One-Degree Digital Format.
$744.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- CHT Readings In A Stable, One-Degree Digital Format.
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- CHT Readings In A Stable, One-Degree Digital Format.
$880.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- CHT Readings In A Stable, One-Degree Digital Format.
-
- Non-Primary Replacement
- 2 1/4″ Flush Mount
- CHT Readings In A Stable, One-Degree Digital Format.
$1,000.00
- Non-Primary Replacement
- 2 1/4" Flush Mount
- CHT Readings In A Stable, One-Degree Digital Format.
-
- Communication Between Busses
- FAA TSO’d to DO-160G & DO-178 Level C
- ARINC 429, CAN, RS422, RS232, Bluetooth
- Communication Between Busses
- FAA TSO'd to DO-160G & DO-178 Level C
- ARINC 429, CAN, RS422, RS232, Bluetooth
-
- Replaces Old MUX-8A Data Recorder
- Monitors up to 7 EI Instruments + 1 GPS Input
- Easy USB downloads
$648.00
- Replaces Old MUX-8A Data Recorder
- Monitors up to 7 EI Instruments + 1 GPS Input
- Easy USB downloads
-
- Analog & Digital Signal Conversion
- FAA TSO’d to DO-160G & DO-178 Level C
- Converts Raw Engine Data to Formatted Serial Data
- Analog & Digital Signal Conversion
- FAA TSO'd to DO-160G & DO-178 Level C
- Converts Raw Engine Data to Formatted Serial Data
-
- FAA approved
- Up to 350 HP engines, engine-driven fuel pumps only
- Red anodized aluminum body, 5.3 ounces
$296.00
- FAA approved
- Up to 350 HP engines, engine-driven fuel pumps only
- Red anodized aluminum body, 5.3 ounces
-
- FAA approved
- For 350-550 HP engines, or gravity-feed engines
- Gold anodized aluminum body, 5.3 ounces
$296.00
- FAA approved
- For 350-550 HP engines, or gravity-feed engines
- Gold anodized aluminum body, 5.3 ounces
-
- PMA’d
- 300 amp
- 3.25″ (W) x 1.75″ (D) x 1.75″ (H)
$60.00
- PMA'd
- 300 amp
- 3.25" (W) x 1.75" (D) x 1.75" (H)
-
- PMA’d
- 50 amp, 50mV (100 amp capability)
- 2″ (W) x 1.2″ (D) x 1.7″ (H)
$48.00
- PMA'd
- 50 amp, 50mV (100 amp capability)
- 2" (W) x 1.2" (D) x 1.7" (H)
-
- FAA approved
- Over 550 HP engines, engine-driven fuel pumps only
- Black anodized aluminum body, 5.3 ounces
$496.00
- FAA approved
- Over 550 HP engines, engine-driven fuel pumps only
- Black anodized aluminum body, 5.3 ounces
-
- FAA Approved
- Stainless Steel
- Pressure Range: 0 – 100 PSI
$248.00
- FAA Approved
- Stainless Steel
- Pressure Range: 0 - 100 PSI
-
- FAA Approved
- Stainless Steel
- Pressure Range: 0 – 100 PSI
$380.00
- FAA Approved
- Stainless Steel
- Pressure Range: 0 - 100 PSI
-
- FAA Approved
- Stainless Steel
- Pressure Range: 0 – 300 PSI
$248.00
- FAA Approved
- Stainless Steel
- Pressure Range: 0 - 300 PSI
-
- Replaces resistive sensor.
- Custom sized per order.
- Designed By Electronics International.
$540.00
- Replaces resistive sensor.
- Custom sized per order.
- Designed By Electronics International.
-
- Screw-in Type, 3/8″-24
- Standard with Most Kits.
- FAA TSO’d, PMA’d
$128.00
- Screw-in Type, 3/8"-24
- Standard with Most Kits.
- FAA TSO'd, PMA'd
-
- Hose-Clamp Type
- Fast Response Style
- Used with .130″ Hole
- FAA TSO’d, PMA’d
$128.00
- Hose-Clamp Type
- Fast Response Style
- Used with .130" Hole
- FAA TSO'd, PMA'd
-
- Hose-Clamp Type
- Robust Style
- Used with 13/64″ Hole
- FAA TSO’d, PMA’d
$128.00
- Hose-Clamp Type
- Robust Style
- Used with 13/64" Hole
- FAA TSO'd, PMA'd
-
- 1 Stainless Steel Hose Clamp
- 2 Stainless Steel Retaining Clips
- 1 Stainless Steel Washer
- 1 P-110-F Collar
$28.00
- 1 Stainless Steel Hose Clamp
- 2 Stainless Steel Retaining Clips
- 1 Stainless Steel Washer
- 1 P-110-F Collar
-
- Screw-in Type, 1/8″- NPT
- Adjustable Depth
- FAA TSO’d, PMA’d
$140.00
- Screw-in Type, 1/8"- NPT
- Adjustable Depth
- FAA TSO'd, PMA'd
-
- Screw-in Type, 7/16″-20
- Adjustable Depth
- FAA TSO’d, PMA’d
$140.00
- Screw-in Type, 7/16"-20
- Adjustable Depth
- FAA TSO'd, PMA'd
-
- Screw-in Type, 1/4″-NPT
- Adjustable Depth
- FAA TSO’d, PMA’d
$140.00
- Screw-in Type, 1/4"-NPT
- Adjustable Depth
- FAA TSO'd, PMA'd
-
- Screw-in Type, 5/8″-18
- Standard with Most Kits.
- FAA TSO’d, PMA’d
$128.00
- Screw-in Type, 5/8"-18
- Standard with Most Kits.
- FAA TSO'd, PMA'd
-
- Wire accessory
- 20ga wire and smaller
- Eliminate the need for soldering, crimps, and expensive connectors.
$5.00 – $20.00
- Wire accessory
- 20ga wire and smaller
- Eliminate the need for soldering, crimps, and expensive connectors.
-
- Fit 2-1/4″ instrument into 3-1/8″ hole
- Black powder-coated aluminum
- Designed for EI’s 2-1/4″ instruments
$28.00
- Fit 2-1/4" instrument into 3-1/8" hole
- Black powder-coated aluminum
- Designed for EI's 2-1/4" instruments
-
- Works with SureFly SIM4P
- Connect to the RPM input channel using E.I.’s VI-2µFA
- Use with EDC-33 (MVP & CGR) and R-1 Instruments
$76.00 – $204.00
- Works with SureFly SIM4P
- Connect to the RPM input channel using E.I.’s VI-2µFA
- Use with EDC-33 (MVP & CGR) and R-1 Instruments
-
- Fit 2″ instrument into 2-1/4″ hole
- Black anodized aluminum
- Designed for EI’s TR-1 instruments
$128.00
- Fit 2" instrument into 2-1/4" hole
- Black anodized aluminum
- Designed for EI's TR-1 instruments
-
- FAA Approved
- Stainless Steel
- Pressure Range: 0 – 3,000 PSI
$380.00
- FAA Approved
- Stainless Steel
- Pressure Range: 0 - 3,000 PSI
Page load link
Demo short description
